Hannibal Lecter Mask
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mask features the signature design with openings for breathing and an ominous, intimidating aesthetic.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 281
- Wydruki
- 0
- Wyświetlenia
- 671
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This mask features the signature design with openings for breathing and an ominous, intimidating aesthetic.
!!Before printing, adjust the size to your face!!
Face Mask Measurement Guide:
Measure Face Height: Start from the bridge of your nose and measure down to the tip of your chin.
Measure Face Width: Measure across the widest part of your face, usually from one cheekbone to the other.
Printing Details:
Layer Height: 0.2 mm for optimal detail and strength.
Supports Needed: Organic supports work best for curved sections and vent details.
Model Cutting: For smaller printer beds, slice the model into sections in your slicer software.
Post-Processing: Use sandpaper for smoothing, and paint it with metallic or aged tones for a cinematic look. You can also pad the inner surface for comfortable wear.
When done printing, you can further adjust the shape for your face using a hairdryer. Just heat the mask in places you want to adjust and carefully bend it to your liking.