Golf Mk7 Front Subwoofer Encolsure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front sub enclosure for a Mk7 Golf
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 785
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Front subwoofer enclosure for a MK7 Golf (left hand drive). Designed for the SB Acoustics SW26DAC76-3-DV. Version 1.1 is the one I ended up using, and added 1" of plywood on the front to make it stronger. If you have an incredible amount if filament laying around V2 allows you to print the whole thing without adding the plywood on the front.
There also is a speaker grill included with some zip ties.
Along with the sub enclosure 3D prints the 3D scans of the passenger footwell of the Golf are in here too if you want to design your own. There are versions with and without the carpet, so you can compare after to make sure the angle of the woofer is right.
Video of the install: