Bearista cup holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cup holder adapter for the Bearista cup from Starbucks.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 311
- Wydruki
- 0
- Wyświetlenia
- 493
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
A friend asked me to make her a cup holder for her new Bearista cup from Starbucks. I made it in two parts for 2 reasons: 1. easier to print / save filament. 2. so the bottom can be modified to fit different cup holder diameters.
Some folks have expressed a tough time with threading the 2 parts together. My CAD skills for threads leaves a lot to be desired. It does work, but it is a pain to line it up. and the print admittedly has probably over-tight tolerances. To help with this, I've added a new STL that will hopefully solve this in 2 ways.
1st. It is the two objects pre-assembled. You can print it out as is, basically in 1 piece. (I wouldn't try taking apart after you print!)
2nd. If you wish, when you put it into Prusa Slicer, you can separate the two parts with the "O" button at the top. Now it will go together with a twist lock (instead of a screw thread). I did a test print of this, and it was much easier than the threaded version.
Hope that solves any issues you might be having! Happy printing.