Trampoline mat loop replacements
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
The kid's trampoline mat loops mostly rusted through and broke off.
You can buy replacement springs, but have to buy a whole new mat to replace the loops.
The printed loops have been in use for months now and they work fine.
You can use 4mm x 80mm split pins or nails to push through the mat loops. Cap them off with an end cap and some superglue to hide the sharp bits.
Getting the spring through the loop is a bit tricky and require some wiggling.
# Printing instructions
Print these solid or with at least 4 walls.
TPU, ABS and ASA hasn't broken yet. PLA lasts only a few months.
TPU is probably best due to the better layer adhesion compared to the other filaments.