Ram_Remix_2X4 SODIMM and DIM slots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this model because I didn't like some things about the original.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I made this model because I didn't like how to original didn't account for heat spreaders and had too many slots resulting in sticks falling in unevenly.
So the main additions are:
Reduced the number of slots to 10 instead of original 19 and added chamfers so slots slide in easier.
Added 2 SODIMM slots as I found myself using the spare space for them on the original.
Made changes to the thumbholes.
Added fillets because I kept scratching myself on original.
Made them not as wide to add a little more rigidity as they felt flimsy.
Added thumbhole for grabbing SODIMMs.
Made the walls thicker to match the bottom edge of the gridfinity ledge.
Made model taller to properly allow for stacking when sticks have heat spreaders.
I did my best to make it conform to the standard gridfinity height but found conflicting information on what the height is supposed to be. I used multiple models and found a step file matching Zack's original only to still be of by 0.0355mm. I decided that was close enough because I was starting to go insane over it.
https://gridfinity.xyz/specification/
https://stu142.com/Gridfinity-Documentation/
WARNING:
In my testing I found that SODIMMs are not uniform widths across generations. I tried accounting for this but be careful when inserting them into the slots. Do not force them in as they should slide in almost on their own. Forcing them could knock off SMT capacitors and resistors close to the edges of the SODIMMs.