Mamiya 7/Mamiya 7ii 80mm f4 lens hood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lens hood for Mamiya 7/Mamiya 7ii 80mm f4, including a small cutout for the rangefinder
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of the Mamiya 6 50mm lens hood by August DeHainaut. A quick thanks to Reddit user u/bacchus10 for providing the dimensions of the original Mamiya lens hood.
The reason that the Mamiya 6 50mm lens hood was chosen as the starting point is because this lens has very similar length compared to the Mamiya 7/Mamiya 7ii 80mm lens (55mm vs 56mm as per the manuals), hence the cutout for the rangefinder is likely to be the correct size (turned out to be true).
The motivation behind creating this model is due to a lack of decent hood for this lens online.
The resulting 3D model works quite well. I printed using a 0.2mm nozzle and 0.1mm layer height, but the minimum horizontal thickness is 0.8mm, so a 0.4mm nozzle should work fine. I used basic PLA but PLA matte should yield better flare resistance.
