doctor martin footwear for motorcycle sidestand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
doctor martin footwear for motorcycle sidestand
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Ha!
Here is my innovative side stand foorwear for my motorbike....
YOU MUST PRINT THIS WITH TPU FILAMENT
My first test was with pla cos I have lots of it. It did not end well.PLA is far too brittle and it wont get past the side stand foot plate...
So now you have some TPU....
I made this with a template of my side stand with its shaft measuring dia 15mm (included with the files)
So, give your side stand a bit of a measure, compare it to the template and scale your boot to fit...
I did not add shoelaces cos I was so excited when it fitted
It might be worth a bit of glue cos with wear and tear the side stand footplate will wear through the sole of the boot but it will not affect the appearance from above.....
YAY
I also added the file of the original boot in case you have other ideas for modification