REVO to Ender/Sovol extruder adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part allows you to install an E3D Revo nozzle/heatbreak on an Ender/Sovol carriage with a Titan extruder.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This will allow you to throw out the fake “all-metal” hotend on your Sovol or Creality direct-drive and install an E3D V6 or REVO6 on the carriage using a Titan extruder. This might work with the Creality extruder, I wouldn't know. I found that extruder to be basically garbage. This will allow you to utilize the original fan and cooling nozzle as well as use the fan that comes with the six.
Take care installing it to be certain that the extruder gear does not contact the frame when you tighten the fasteners. It won't interfere with your printing but it may cause wear to the driven gear.