Panda Breath Snapmaker U1 Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the remix from the original parts found here: https://github.com/bigtreetech/Panda_Breath/tree/master
- Ocena
- 4,947 / 5
- Polubienia
- 151
- Pobrania
- 1115
- Wydruki
- 17
- Wyświetlenia
- 5369
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Since the original assem,bly instructions for the panda breat tell you to raise the assembly off the ground and I did not want to clamp the assembly with too much force I have upgraded the original designe by adding supports.
On the Expansion Bracket I have also modified the perimiter to be printed on the full hight so it can be easy printed without the need for supports (at least in that area).
I have printed both parts with eSUN ABS+ fillament in black.
The other necessary parts to print can be found on Github / the wiki page.
To ensure the fit on the Panda Breatgh it might be necessary to slightly modify the scale in X and Y direction. The reason is the manufacturing tolerances for the Panda Breath and it also depends on which filament you use.
All Brands and Names/Logos are property of their respective owners.