Mildly Phallic Motorcycle Helmet/Jacket Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed a little hanger to hold my motorcycle helmet, Helite airbag jacket (heavy), and riding pants on a Prusa Mini.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Open Community License v1
Made this by free-handing some splines in OnShape after my heavy a$$ jacket started pulling my old coat hanger out of the wall. Printed a test-quality piece first so I could make sure it would fit (file attached,) then beefed it up with more perimeters because of how heavy my jacket is. I printed this out of some old Overture PETG I had bought a year or so ago, I would probably make it thicker if I had to use PLA.
This fits my helmet (specifically a Scorpion EXO Ryzer) fairly well, though if I was to redesign it I might make the top hook a bit longer. This just barely fits on the 180mm printbed of the Prusa Mini. I used a #12 screw for the top and a #10 on the bottom, out of some random Harbor Freight screw kit. I would DEFINITELY only mount this to a stud unless you just use this for a helmet and keys.