Custom NFC / RFID tag and Snapdryer Label
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom RFID tags based on 25mm sticker tags
- Ocena
- 4,5 / 5
- Polubienia
- 68
- Pobrania
- 395
- Wydruki
- 4
- Wyświetlenia
- 1841
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These tags were made for the super cheap and readily available Ntag215 25mm RFID tags.
Special feature for Polydryer / Snapdryer owners:
The ring on the tags is designed to fit over the rubber plug of the boxes. You can put the label on the loop of the plug when you put the filament away. That way the tag also acts as label for the boxes and makes sure you have it always at hand when you use it. It also reminds you of closing the plug after unloading the filament as you have to put the tag back on it.
The ring is also big enough to feed a PTFE tube through, so it may be useful to other drybox / dryer users as well.
Simply customize the tag according to your needs and preferences. You can make the tag entirely from the material it represents (not recomended for PVA), you can put symbols or text on it, do as you please.
I decided to use 6mm circles for the filament color, 8mm text for the material (PETG, TPU, PVA,...) and 6mm text for optional additional properties (95A, HS, CF, etc.). You can use the .3mf file as a starting point for your own customization.
Print with a 0.4mm nozzle with 0.2mm layer height.
Put the RFID sticker on the backside pocket.
Write the filament parameters with e.g. https://printtag-web.pages.dev/
UPDATE based on a suggestion of @AlvinK_313056:
Version 2 has a slot for a piece of 1.75mm filament to show as a sample.
No need to print the tag for each color --> print in batch
Re-use the tag for other colors, just replace the filament sample and update the tag
Can be immediatelly used for the first print after unboxing a new spool
For the Snapmaker U1, I created tag holders so the printer can automatically read the tags when loading the filament.
If someone is looking for the box stacker you see in my pictures: here is Ken P's design
Update 2:
Added embosed v1 tags for ABS, ASA, HIPS, PA, PC, PCTG, PETG, PLA, PVA, TPE, TPU
Update 3:
Added embosed v2 tags for ABS, ASA, HIPS, PA, PC, PCTG, PETG, PLA, PVA (not sure if you want to add filament to this one), TPE, TPU