1 / 3
Toilet Paper Cover | Bathroom | Hygiene — zdjęcie 1
1 / 3

Toilet Paper Cover | Bathroom | Hygiene

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple 3D-printable cover that hides the toilet paper roll for a cleaner and more minimal bathroom look.

Ocena
0 / 5
Polubienia
3
Pobrania
8
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

This toilet paper cover is designed to hide the visible toilet roll while keeping it easily accessible. Many bathrooms have open holders where the roll is fully visible – this small add-on gives it a much cleaner and more modern appearance.

The cover simply slides onto the holder and sits in front of the roll. The semicircle cut-out at the top allows the holder to pass through while keeping the front surface smooth and minimal.

Perfect if you like minimal design, clean bathrooms, or just enjoy unnecessary but satisfying upgrades.

Since it's a flat piece, the print is quick, easy, and beginner friendly.

Printing

Recommended settings:

  • Layer height: 0.2 mm

  • Infill: 10–15%

  • Supports: not required

  • Orientation: standing on the heated bed with brim (cut bottom a little for extra stability)

  • Material: PLA / PETG

Print time is usually under 2 hours depending on your printer.

Why this exists

Because sometimes the only problem in life is that you can see the toilet paper roll.

Problem solved.