Magnetically Attached Keychain for 6 Card Wallie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a Magnetic Key Fob which can dock on your Wallie
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a simple replacement for the original 6-Card Bumper
It uses 6x2mm magnets
To Print the Key Fob, split the model in half in the slicer along the keychain ring.
the Orientation of the inserted Magnets is important, since the repelling-forces of the magnets strengthen the force with which the key-fob is held to the magnetic bumper.
the small locking-lip on the bumper will prevent the key-fob from being pulled out horizontally.
When Printing, pause the print just before the holes for the magnets get covered up, insert the magnets in the correct orientation and resume the print. The Build Plate must not exceed 80°C, or else the magnets might get demagnetized / weakened due to high temperature.