XSR 700 SW MOTECH Tank Ring Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to mount the SW MOTECH Pro-Ring for tankbags on the XSR 700 Yamaha motorbike.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This tank ring adapter allows you to mount a tank bag (SW-MOTECH Pro ring) on the Yamaha XSR700. On this bike, the fuel cap sits very far forward, close to the handlebars, which makes the standard SW-MOTECH tank ring position problematic in terms of clearance.The adapter shifts the mounting point further toward the center of the tank. It uses two existing screws of the front tank cover, so no permanent modifications are required. In this position, the tank bag does not interfere with steering.The part is printed in PETG because of its higher heat resistance compared to PLA.
As additional Parts you will need:4x M4 x 10mm screws4x M4 nuts(+ SW-MOTECH Ring)
Have fun printing, drive safely!