MTB bar end plate V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d printed bar end plates inspired by revgrips prototipes seen on reece wilson bike
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 158
- Wydruki
- 0
- Wyświetlenia
- 1279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3d printed bar end plates(is that the right name?) inspired by revgrips prototipes seen on reece wilson bike, i liked them the most when (part 1) printed out of TPU 95A with 30% infill and 1.8 top/bottom thickness, i recommend printing part2 with a rigid filament like PLA, PETG or ABS maybe.
After testing them both on a section of a local trail i can confirm style B feels better, though style A might be better suited for really rough stuff.
To assemble them you need an m4x20 and a nut for each barend.
Here is the onshape link if you want to make some changes: https://cad.onshape.com/documents/282e40acfeab6165cacc2d37/w/bd8a8228ad93672eeffc5757/e/c31692d5fe46d69f5d156ca3?renderMode=0&uiState=69ad38452d5ce4d9488b49ff