lumi-con 6x6 mini (not macro)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
open source diy strema controller bases on lumia stream
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
LumiCon 6×6 Mini Case (Push-Fit)
Build Notes: esp firmware version 4_0_0 is the latest stable release with full functionality. v0_1_0 onward contain the virtual pet in addition to stream controls, it is interacted via actions and variables inside the plugin.
A compact, push-fit 3D printable enclosure for the LumiCon 6×6 Mini, an open-source DIY stream controller that links into Lumia Stream.
This project is in active devolopment, as I finalise pcb designs a build guide will be added. Latest versions will always be on github before here.
Features
Push-fit enclosure (If using tft you will be required to screw this to the enclosure)
Designed for a 6×6 key grid (36 keys)
Space for a small TFT screen (128×160) for messages/alerts/status
Modular, remix-friendly design (open-source project).
Designed to be printed with minimal supports at 0.2mm, supports only for "6x6 rear" and "electronics rear". The leg connector will need to be cloned and mirrored.
build files and FW available on git hub
https://github.com/darylbwickham-design/lumicon_6x6_mini
youtube: