Toilet Paper Holder for Rat Cage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple toilet paper roll holder for use in pet rat cages. This mounts perpendicular to the cage face.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My pet rats like to use toilet paper as nesting material. Maybe yours do too! This toilet paper holder mounts perpendicular to the cage. It is modular. Choose and print parts based on what cage you have and how you want to hold the roll in place.
Here is a photo showing the holder printed in all configurations
α - critter nation cage mount & rod ( parts a & b ) w securing finger ( part e )
β - critter nation cage mount & rod ( parts a & b ) w spring clip ( parts f & g )
γ - generic cage mount ( parts c & d ) w securing finger ( part e )
δ - generic cage mount ( parts c & d ) w spring clip ( parts f & g )
Parts list
Letter | Image | Name / Description |
|---|---|---|
a |  | critter nation cage mount - threaded fastener |
b |  | critter nation cage mount - threaded base and rod |
c |  | generic cage mount - triangle plate |
d |  | generic cage mount - triangle base and rod |
e |  | securing - finger |
f |  | securing - spring clip |
g |  | securing - spring clip washer |
Parts Explanation
There are two options to fasten the holder to the cage. There is a base and rod designed to fasten tightly to critter nation brand cages ( parts a & b ). There is also a base and rod designed to fasten to non-critter nation cages ( parts c & d ).
There are two options to secure the toilet paper roll to the rod. These prevent the toilet paper roll from sliding off the rod by providing a horizontal constraint. There is a finger option ( part e ). There is also a spring clip with a special washer ( parts e & f ).
Printing notes
I printed mine on a core XY printer using a .4mm nozzle. Part f, the spring clip required supports. All parts were printed without supports.
Non printable parts
The generic cage mount ( parts c & d ) uses 1/4-20 screws and matching wing nuts. M5 or M6 screws and nuts will also, probably, work.
Assembly notes
Snap together as needed. Put the roll on. If using the spring clip ( part f ), then push the washer ( part g ) over the front of the spring clips