Hitchhiker thumb grip for Leica Q
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A thumb grip for Leica Q2 and Q3 cameras designed to stick on 3M VHB tape.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A thumb grip for Leica M10 and M11 cameras that keeps the hot shoe free, allowing you use a flash without removing the thumb grip. It adheres to the camera body with 3M VHB acrylic foam, which is strong but removable without impacting the finish.
The VHB take should be 5952 (1.1mm thick).
To install: Add a strip of VHB tape to the inset in the back of the grip. Remove the VHB tape backing and line up the grip with the thumb indentation and lightly adhere without pressure. Once satisfied with the positioning, apply pressure to the grip.
This is inspired by the Thumbie grip and the improvements I made to its design for my Hitchhiker-M grip for Leica M10/M11.