1 / 3
Uhrenzeiger selbstleuchtend - clock hands glow in the dark — zdjęcie 1
1 / 3

Uhrenzeiger selbstleuchtend - clock hands glow in the dark

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hands for RC-clock glowing in the dark - Zeiger für Standardfunkuhr mit Prusament Ultra glow

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
57
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I like an analog clock in the night, because its not as exact as a smart phone time so i can sleep again faster after waking. But the filaments up to now went dark in the early morning hours. The ultraglow filament is really the burner. In the photo i compared it to the Polylite luminous rainbow filament and its not even close. The ultraglow is still visible after 7 hours.  But: it needs a hardened 0.6 nozzle. I added a lower part from PETG white and a white PETG line on top of the hands with not glowing material. Finally i had to enlarge it by 4% due to filament shrinking so they fit on a standard rc-clock. There is also a hand for the seconds but its from metal and it makes sounds in the night so i skipped it. Maybe I can add a cap on the minute hand.

The clock-design was not made by me but the hands are. 

Elegant Desktop Clock From TheTitan3D https://www.crealitycloud.com/model-detail/68910f0cf1aaae515469c9e8

Tagi