35A controller mount for RadRunner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to fit the 35A controller inside the center console
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 478
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I didn't like having the controller exposed to the elements below the frame, so I designed this model to fit the controller inside the center console with minimum modification.
I used the center console top screw so I only had to drill 2 holes, one to hold the controller, and one to pass the cables.
I used m5 heated inserts.
A cable extension is needed for the motor, the one attached to the controller is too short by a few cm. I bought this cable from aliexpress.com/item/1005002871854977.html?gatewayAdapt=glo2fra&gatewayAdapt=glo2fra&spm=a2g0o.order_list.0.0.21ef5e5bngVUyO and it seems to be working fine .
Print settings
0.28mm layer height
4 walls
30% infill