Holder for CW paddle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spacer and a stand for the CW paddle from Wayne VE3CZO.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I have a CW (Morse code) paddle made from Pressure Sensitive Resistors by Wayne VE3CZO. I quite like the paddle but wanted a spacer made specifically for the circuit boards.
There are two models. One is just a spacer for those that hold the paddle in one hand and operate with the other. The second has a foot so it will stand on a table.
I printed these on a Prusa MK4S in PETG with 0.2mm layers (structural profile, standard fill & perimeters). The four screw holes are threaded for M3 screws. Any length from 6mm to 12mm is fine.
You are free to do whatever you like with the files provided you maintain my call sign on the bottom.
73, Jim VE3LMK