Hollow Clock Ver3.14159 - Internet time and auto hand setting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hollow Clock with network time and auto hand setting.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hollow Clock Version 3.14159
Please note that this is a moderately complex build. If you don't have experience with3d printing, wiring electronics, or loading code to a Pi Pico, you should try a few simpler projects first.
This is a remix of Hollow Clock V by shiura as published on printables.com
Note: There are two verions of this build. (The one originally published March 26, and a new - Rev2 addd in April 26. ) The print files for these two versions are mostly the same. There are minor revisions to the cases in Version 2 which are backwards compatable with the original version. The major differences are that the April version uses stepper drivers avalable on Amazon instead of the Micro Center versions. This combined with the use of Dupont connectors provides a cleaner hardware setup. The electronic connections are the same. New instuctions and parts list are included in the Info directory.
The rev2 photos appear before the originals.
See the Instructions.txt file (under Info) for detailed building instruction for original version and Instructions_rev2.txt for help with the new version.