1 / 6
Tapo C113 and TCW61 camera mount for A1 — zdjęcie 1
1 / 6

Tapo C113 and TCW61 camera mount for A1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model allows you to place a Tapo C113 camera on the screen of the Bambu Lab A1 printer

Ocena
0 / 5
Polubienia
5
Pobrania
48
Wydruki
0
Wyświetlenia
226
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This model allows you to place a Tapo C113 camera on the screen of the Bambu Lab A1 printer

 The biggest advantage of this model is that it is adjustable, and it also allows you to reuse the camera's original silicone to achieve the same grip as with the camera's original base.

 Instructions for assembling the base

 1 Remove the silicone piece from the original base

2 Place the silicone piece on the 3D printed base

3 Confirm that the silicone piece is perfectly placed

4 Remove the camera connector

5 Place the connector using the 3D printed threaded cylinder

6 Place the base on the printer screen

7 Place the camera on the base

The base and camera will be ready

Tagi