Magnus Pro/Evo Magnetic Wire Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Wire Guide for Magnus Sit/Stand Desks.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Takes 8 10x2mm magnets; requiring a PAUSE to be inserted immediately prior to the top level over the holes. During the pause, the magnets can be inserted, with 2 used per hole.
The holes are designed with just enough clearance that the magnets should be able to be pushed in, but not magnetically attach to the nozzle as the following layer seals them in.
Magnets were purchased off of Amazon (10mm diameter). I suggest using a boolean to carve out one of the corner sections to ensure the magnet size is compatible, and that pauses are inserted either before or after the target layer.
(On Bambu Labs, this occurs BEFORE the selected layer, so you'd need to navigate to the layer view where the first bridge is created, and then insert the pause.)
Tested only on the Evo; I assume the Pro would work as well.