1 / 1
Sovol SV08 9mm Gantry (on top) *not tested yet* — zdjęcie 1

Sovol SV08 9mm Gantry (on top) *not tested yet*

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified motor mounts and xy joints for 9mm belts with double shear support

Ocena
0 / 5
Polubienia
5
Pobrania
17
Wydruki
0
Wyświetlenia
231
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

CHECK OUT MY NEWER AND PROPER VERSION HERE!

PARTS  NOT TESTED

all parts got "taller" for the additional height needed for the bigger belts - so not modified in bot directions to keep the belts kinda centered

i'm working on a proper mod but it will take a little longer
so if you plan on doing it properly, wait for the other version

the gantry parts are a remix from iEBPO - could not add it to this post because there would'nt be a fitting license - i think it makes more sense to put all the parts in here instead of splitting them and create possible more confusion

the parts are modified to use 5x35mm pins where idlers or pulleys are used
make sure your printer and filament are calibrated so the pins have a snug fit!

the motor mounts have a built in double shear support for F695ZZ bearing
motor with longer shafts are required!

the motor mounts and xy joints(not the belt tentioners) all use heat inserts no m3/4 nuts

Print Settings(voronish)
ABS or ASA
4 walls
4 top & bottom layers
35% gyroid infill
print all of my modified parts as oriented
supports are needed for the xy joints and the motor mount tops

BOM

qty

description

link *

2

motor

https://s.click.aliexpress.com/e/_c34XKDin

2

~4m belt

https://s.click.aliexpress.com/e/_c3b0sHiP

10

5x35mm pins

https://s.click.aliexpress.com/e/_c3GEXG7l

2

20 tooth motor pulley|bore 5mm| belt width 9mm

https://s.click.aliexpress.com/e/_c3QJpfKR

2

20 tooth pulley|bore 5mm| belt width 9mm

https://s.click.aliexpress.com/e/_c2xsic6T

12

no tooth pulley|bore 5mm| belt width 9mm

https://s.click.aliexpress.com/e/_c2xsic6T

2

F695ZZ bearings

https://s.click.aliexpress.com/e/_c4UDqdnv

12

m4x40 bolts

https://s.click.aliexpress.com/e/_c3UFV159

m3/m4 heat inserts

https://s.click.aliexpress.com/e/_c3Llnb71

can't tell the right amount and length of all other bolts right now but a bunch of the original ones are used
i would recommend get a m3/m4 bolt set with different lengths like this one

to connect the new motors to the basic wiring the pins net to get figured out
the cables can be connected with a new connector or soldered
when using connectors(jst ph 2.0) get yourself a pair of wire strippers and crimpers

*all product links are affiliate links - i get a small kickback when you buy from these links with no extra cost!

Tagi