(Parkside/Universal) Spirit Leveler Holder/Wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Spirit Leveler holder/mount for Levelers with the follwing size: 50mm (1.97") wide x 20mm (0.79") thick
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a holder/mount for a spirit level with the following dimensions:
50 mm (1.97") wide × 20 mm (0.79") thick
The holder includes screw holes so you can mount it to a wall or add stability when placing it on the floor. The print can stand on its own, with or without the spirit levels inserted.
Use flat (countersunk) screws when mounting it to the wall.
Keep in mind that the walls of the holder are not very thick, so handle it carefully to avoid breaking it during installation. I pre-drilled the screws slightly with a drill and then tightened the screws using a screwdriver.