Sriracha Chilli Sauce Bottle Stand / Stojánek na chilli omáčku Sriracha
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sriracha Flying Goose Chilli Sauce 455 ml Bottle Stand / Stojánek na chilli omáčku Sriracha Flying Goose 45 ml
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Poznámka: Český popis naleznete níže.
Description
A simple stand for a Sriracha chili sauce bottle that allows storing the bottle upside down. This ensures the sauce is always ready to use – even when only a small amount remains in the bottle. There is no need to shake the bottle or wait for the sauce to flow down to the nozzle.
The stand is designed to be:
stable
easy to print without supports
The model fits the standard 455 ml Sriracha bottle (Huy Fong Foods).
Print settings
Recommended settings:
nozzle: 0.4 mm
layer height: 0.2 mm
perimeters: 3
infill: 15%
Print orientation
Print the model on its back.
The model is designed to be printed without supports.
Material
The model in the photos is printed from PETG, but it also works well with PLA.
Popis
Jednoduchý stojánek pro láhev Sriracha chilli omáčky, který umožňuje skladovat láhev dnem vzhůru. Díky tomu je omáčka vždy připravená k použití – i když už jí v láhvi zbývá jen malé množství. Není potřeba láhev protřepávat nebo čekat, až omáčka steče ke hrdlu.
Stojánek je navržen tak, aby byl:
stabilní
snadno tisknutelný bez podpor
Model pasuje na běžnou 455 ml láhev Sriracha (Huy Fong Foods).
Nastavení tisku
Doporučené nastavení:
tryska: 0,4 mm
výška vrstvy: 0,2 mm
perimetry: 3
výplň: 15 %
Orientace při tisku
Model tiskněte na zádech.
Model je navržen tak, aby se tiskl bez podpor.
Materiál
Na fotografiích je model vytištěn z PETG, ale bez problémů funguje i PLA.