Epoxy Mixing Tray & Spatula | Snap-Off Design (6g)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fast, 6-gram print for mixing 2-part epoxies or glues. Features a built-in snap-off mixing spatula. No supports needed
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 175
- Wydruki
- 1
- Wyświetlenia
- 354
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Stop ruining random pieces of cardboard when mixing 2-part epoxy! This ultra-lightweight (only ~6 grams) mixing tray prints in minutes and features a clever, integrated design perfect for quick repairs.
Key Features:
Snap-Off Spatula: The mixing stick is printed attached to the tray. Just bend it to snap it off, and you have a perfect tool to mix and apply your adhesive.
Curved Bottom: The tray has a smooth, curved interior, making it easy to scrape up every last drop of your mixed epoxy.
Super Fast Print: Designed with thin walls to minimize filament use. You can keep a stack of these in your workshop ready to go.
Disposable but Reusable: If you let the epoxy cure completely, you can often just pop the hardened puck right out and reuse the tray!
Printing Instructions:
Orientation: Print flat on the bed.
Supports: NONE.