Zwift Click v2 Flat Bar Mount v1.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for Zwift Click v2 with added 4mm of clearance to mount over shifter mounts, bringing them closer to the grips.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 424
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Zwift rubber band mounts were ok but were never very solid, sliding as my workout progressed, and I had to mount them too far from my grips due to the shifter and brake arrangement.
Their 3D printable mounts were a good improvement in stability. I had to mount them upside down to slide partially under my Claris shifter indicators but they were still a little too far away for my liking due to lack of clearance to get over the shifter and brake mounts. (see photos of mount with the Z logo)
Luckily Zwift provided the STEP files along with the STLs so I was able to add the needed 4mm clearance and get them as tight as possible to my grips.
Printed in Prusament PETG Ultramarine Blue.
0.4mm nozzle (0.6mm won't work)
0.2mm layer height
3 perimeters
10-15% Rectilinear infill
Organic supports