Sky-Watcher AZ-GTI Polar Alignment Scope attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable polar scope attachment for Sky-Watcher AZ-GTI mount that allows polar alignment whilst in EQ mode.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
For use with Sky-Watcher AZ-GTI telescope mount in EQ mode. I have designed a removable bracket that holds a Skywatcher HM5 polar scope, that allows polar alignment on this otherwise excellent little mount.
Can be printed without support. If you have it so that the open side of the semi-circle is pointing upwards.
It has space for square nuts that some 3mm bolts go through allowing for collimation, basic but effective enough. I glued wing nuts after screwing them fully backward onto the head of the bolts.
Published as an experiment for you to play with I the spirit of sharing. I can't guarantee it's use or offer any other guidance other than give it a go.
You will also need a Skywatcher HM5 polar scope, some link m3 bolts, some m3 square nuts and also wing nuts.