Elegoo Neptune 4 PRO - Filament Guide (tighter mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Filament Guide. The original (by AST, @Ast_2114260) was too loose on the top bar.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a remix to secure it better to the top mount. If the original works for you, then go with that. But if it is too loose, you might want to try this one.
Since I have the filament sensor mounted above the extruder, this filament guide is great to allow proper alignment of spooled filament and keeps it from dragging against the bar and the dry box holder next to it.
This is for the Neptune 4 Pro (and most likely will work on the Plus and Max). I do not believe that it will work on the regular Neptune 4 as that top bar appears to be covered.