1 / 4
E Scooter NAVEE N65I II U Lock Holder (40 mm Tube) M4 Screws easy to print — zdjęcie 1
1 / 4

E Scooter NAVEE N65I II U Lock Holder (40 mm Tube) M4 Screws easy to print

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

U-lock mount for NAVEE N65i II (40 mm stem). Fits ~16.6 mm U-locks. Uses 6× M4×10 screws and nuts for assembly. 🔧

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
134
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

NAVEE N65i II – U-Lock Mount (40 mm Tube)

This 3D-printed mount is designed to securely attach a U-lock holder to the steering tube of the NAVEE N65i II electric scooter.

The clamp fits a 40 mm diameter tube, which matches the stem size of the scooter. The mount consists of two clamping parts that are tightened together using M4 hardware to create a strong and secure hold.

The design includes reinforced side brackets to attach a standard U-lock holder plate.

The holder is designed for U-lock bars with a diameter of approximately 16.6 mm.

Features

  • Designed specifically for NAVEE N65i II

  • Fits 40 mm tube diameter

  • Strong clamping design for stable mounting

  • Compatible with many common U-lock holder plates

  • Lightweight but rigid structure

  • Easy to print without supports (depending on slicer settings)

Hardware Required

For assembly you will need:

  • 6 × M4 x 10 mm screws

  • 6 × M4 nuts

The screws clamp the two halves together and secure the mounting plates.

Assembly

  1. Place the two clamp halves around the scooter stem.

  2. Insert the M4 x 10 screws through the holes.

  3. Secure them with M4 nuts.

  4. Tighten evenly until the mount sits firmly on the tube.

⚠ Do not overtighten to avoid damaging the printed part.

Notes

  • Designed for 40 mm tube diameter.

  • If your printer tolerances are different, you may need slight scaling or sanding.

  • Printing in PETG or ABS is recommended for better durability. But PLA is also okay to use.

Tagi