Supports for Poppin Stackable Letter Tray & Desk Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Poppin stackable organizers frequently get misaligned and collapse. These simple supports help keep them in place.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Poppin makes a landscape letter tray and desk organizer, which they claim are stackable. But, the plastic tends to bend in a way that causes them to fall into each other. These small supports help keep them in place. They also enable you to slide back the upper letter tray to give it a little bit more of an offset to improve usability. This is a pretty basic design I whipped up. You could probably improve on this or even add more elevation to further space out the units.
NOTE: The small ridges on the bottom of the desk organizer are slightly wider than the ridges on the bottom of the letter trays. Use the "tray_support_wider" file to prop up the desk organizer and the regular tray_support to prop up the letter trays.
I printed in PETG with pretty minimal fill and perimeters, and it works fine. Other materials would probably work fine too.