1 / 5
MiSTress1200 unofficial printed parts — zdjęcie 1
1 / 5

MiSTress1200 unofficial printed parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Re-created set of printed parts for mounting a MiSTress1200 board in an Amiga 1200 case

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
101
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Public Domain

A set of printable parts to mount the MiSTress1200 board (from 8bits4ever) in an Amiga 1200 case.

These are not the official STLs, they've been recreated from scratch by taking measurements (which are likely not as precise as the originals). They've only been tested in an A1200.net case, and not an original A1200 case.

I created them mostly so I could print them in a different colour and add a little more strength/thickness to the fan mount and back plate. As with the original part, the main board mounting plate requires 3 heat-set inserts.

As an added extra, I designed a bracket/blanking plate for the floppy drive area that lets you use a fake floppy eject button as a switch, using a Cherry MX key switch (which can be wired in parallel with the menu button)

Tagi