1 / 2
Glowforge Aura 4" to XTool Smoke Purifier F1 or AP2 3" vent hose adapter — zdjęcie 1
1 / 2

Glowforge Aura 4" to XTool Smoke Purifier F1 or AP2 3" vent hose adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Connect your Glowforge to an XTool air filter, with some nice design features.

Ocena
0 / 5
Polubienia
1
Pobrania
29
Wydruki
0
Wyświetlenia
115
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

Did you also make the dumb mistake of buying a Glowforge laser cutter like the Aura but you can't afford to replace it? Don't want to give Glowforge another dime so you bought the XTool air purifier? Let's connect them!

The small end of the adapter fits inside the XTool tube end so you don't have to remove that part from the hose when swapping between your XTool laser and your Glowforge. It has external, tapered crush ribs for fit. The big end goes on your Glowforge 4" port and features internal gripfins for a snug fit.

I saw a bunch of generic 4" to 3" hose adapters but it was difficult to know whether they fit this particular purpose well, and none seemed to have gripfins or crush ribs, so I made this. Enjoy.

Tagi