Baroque Travel Case for Philips OneBlade 360
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Medieval baroque grooming case for OneBlade 360. Challenging print focused on fine relief and smooth interiors. 3 parts,
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This design draws visual inspiration from the material culture and decorative language seen in Kingdom Come: Deliverance II.
The relief was approached experimentally, incorporating fine nuance, layered carving depth, and subtle surface variation to evoke the character of late medieval decorative objects.
The case is sized for modern electric grooming tools such as the OneBlade 360, balancing historical character with practical usability.
The model consists of three parts:
Main body
Relief panel
Clasp
The hinge of the main body is printed as an integrated component.
For best results, reduce print speed and prioritize consistent extrusion.
Due to machine availability during development, this model was primarily tested on the Snapmaker U1. Results on other printers may vary, so adjustment of speed, flow, and cooling is recommended.
■Printing Instructions
Orientation
The main body has a decorated face and an open face.
→ Print with the open face oriented upward.
Recommended Settings
Lower print speeds for best surface quality
Consistent extrusion is more important than speed
Fine layer heights recommended for relief clarity
■Assembly & Finishing Guide
Post-Processing
Carefully remove all supports to preserve surface detail.
Trim away the brim using flush cutters or a sharp blade.
Lightly flame-treat the surface to reduce fuzz and improve finish (use caution).
Assembly Steps
Press-fit the clasp onto the central bar on the open side of the body.
Install with the relief-facing side upward.
The relief panel may be painted or highlighted for added depth and contrast (optional).
Attach the relief panel using adhesive to complete the assembly.
Minor sanding and finishing may further improve the final appearance depending on print quality.
■Notes
Designed as a functional object with historical decorative influence
Intended for single-material printing
Surface character improves with slower printing and careful finishing
Update Notes
Improved the files.
Reduced peeling and warping on the first layer.
Made the rear pattern grooves shallower for better printability.
Added 3MF files for the Bambu Lab A1 and STL files.
Increased latch strength and added two latch variants.