Mouthpiece Labs -- sax mouthpiece forms with various beak thickness
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Saxophone mouthpiece forms for testing the most comfortable beak thickness
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
These are mouthpiece shapes with various beak thicknesses.
For real saxophone mouthpieces, we have a parametric mouthpiece modeling engine at mouthpiecelabs.com . Visit the site the create yours!
Testing instructions: pick Soprano, Alto, Tenor, or all of them, and download the corresponding files. Each folder consists of beaks of 8, 9, 10, 11 and 12mm thick. When the mouthpiece form is printing, put on a reed and place it in your mouth as if you are playing it.
You don't need to print all 5 thicknesses at once. Start with 10mm and decide if you want to go up or down.
Print instructions: use standard unblended PLA or PETG, or anything you're comfortable with putting in your mouth for a few seconds.
These objects don't require as much precision as a real mouthpiece, so it can be printed with any infill and any layer height your printer is capable of