The Chimaera Case - Base Pack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unreasonably strong, 100% printed, and fully modular electronics case.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is the Chimaera Case, a fully modular, 100% 3D printed electronics case.
I developed this to act as a CinePi build case, but it's well-suited to just about any component within a 150x150mm footprint. Depends on configuration, but I was safely able to stand on/do pushups on it.
To keep it a buck fiddy: You take six Frames, put em together, slot Punch Pins through the teeth, and you have a Prism. Place Shards (panels) into the side holes, and place Punch Pins or Pull Pins in the side-mounting holes. Prisms can be attached together via Set Pins. Finally, use Set Pins to place however many Exos you need on the outside.
Full build guide: https://youtu.be/mmLJmAmbN-A
The 'x#' refers to the internal area, with the mm size of Frames being x*30+30.
Used to be a paid product; Not how I want to do things anymore. Have at it, remix however you like, add it to your project, I don't mind. Just build something cool, and post it in the makes section if you want. Thanks.
Comes with: Strap Mounts, RasPi Mounts, and RasPi Camera Module Mounts.