Cigarette capsule | Waterproof
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Capsule for special cigarettes. 10.5cm (4.13 inch) long compartment.
- Ocena
- 5 / 5
- Polubienia
- 192
- Pobrania
- 755
- Wydruki
- 6
- Wyświetlenia
- 3393
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
---------- UPDATE AUGUST 2023 ----------
Added a printable O-Ring by @Das_Enzym_395842
Print it in a flexible filament like TPU.
--------------------
Capsule for special cigarettes.
Remix of "The Desperado | Waterproof Keyring Capsule" Without Logo.
10.5cm (4.13 inch) long compartment.
At the moment, the part is designed to work with o-rings (10mm diameter and 2mm thick) to make a seal.
The 3D-printed version of the O-rings is tightly dependent on the calibration of your flow rate. If the are to snug or to loose change the values of your flow in 10% steps up or down.
If you want more storage, check out this remix by Gruthius: https://www.thingiverse.com/thing:4972899
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
20
Filament: Generic Ender White PLA
Notes:
If you have bad adhesion with the "large" part, use a 8mm brim. Worked great for me.
Category: Containers