Housing for mounting Liftmaster Garage Door Remote
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a slide-in housing for the LiftMaster 373LM garage door remote so that you can use a strong, heat resistant tape
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a slide-in housing for the LiftMaster 373LM garage door remote. This mount is designed to be adhered to a vehicle surface so that you can use a strong, heat resistant double-sided tape.
Before this I was using adhesive hook-and-loop tape. It kept failing during the summer, so I made this so that I can use a stronger tape.
Operate all buttons while the remote is docked.
Slide the remote out easily for battery changes or portability.
Snug fit so it doesn't shake loose or rattle.
Tested in 110°F+ summer temperatures without warping or adhesive failure.
Make sure to print in high temperature resistant filament. I'm using PETG and is working great.