Bryton Gardia R300L (Saddlebag) Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaption of the Garmin mount for Bryton mounts and additional mount for saddle bags.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the excellent 3D Printing Friendly Garmin/Wahoo Quarter Turn Interface that adapts the mount specifically for the Bryton Gardia radar light.
In addition to the quarter-turn interface for the radar, this version also integrates a saddle bag mount, allowing you to attach the radar directly to a saddle bag (Arschrakete)
The mount can be attached to a saddle bag in two different ways:
Using the two zip ties
Simply sliding / clipping it onto the mount for quick attachment
Features
Compatible with Bryton Gardia rear radar
Based on the Garmin/Wahoo quarter-turn standard
Two mounting options for saddle bags
Compact design that reduces clutter under the saddle
Mounting
2 Heat inserts are required, if you want to mount a bryton part, you have to use the vertical holes. For Garmin, the horizontal ones should be necessary.
Assemble the mount as in the original model
Skrew it onto the mount
Print Settings
Recommended:
Layer height: 0.2 mm
Infill: 30–40 %
Material: I used PETG for strength and heat resistance
PLA may work but can deform in hot weather.