1 / 4
CO2 Sensor Box (SenseAir S8 and ESP8266 NodeMCU)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the SenseAir S8 CO2 meter and ESP8266 NodeMCU, all the screw holes are compatible with M3 bolts.i…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a case for the SenseAir S8 CO2 meter and ESP8266 NodeMCU, all the screw holes are compatible with M3 bolts.
i tried to keep everthing reasonably compact, still leaving enough room to solder wires onto the ESP8266. I'm using this setup to report CO2 levels into HomeAssistant using ESPhome, which works great.
I printed everything with PETG, but I see no reason why PLA shouldn't work.
Category: Electronics