1 / 10

3D Printer header (Pulsar X1 single)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Peter

@Peter_42310

INTRODUCTION This is another new header for 3D printers (FDM) very easy to print and assemble it.

Ocena: 0 / 5
Polubienia: 6
Pobrania: 65
Wydruki: 0
Wyświetlenia: 514
Oceny: 0

Aktualizacja u źródła: 12 kwi 2022

Informacje o modelu

Źródło: Printables
Kategoria: Bambu Lab Parts & Upgrades
Licencja: Creative Commons — Attribution

Szczegóły Pliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (5)

INTRODUCTION

This is another new header for 3D printers (FDM) very easy to print and assemble it. There is no need for any support and it is printed very easily.

There is one piece build in methacrylate (but can be printed too), which supports all the elements of the electronics, in this way it is completely removable. Simply with 4 screws you would remove fuser, fan and level detector.

It is an ideal header to use as interchangeable header and for to mount a laser engraver or any other type of accessory. When using it in any printer design, simply bear in mind that the distance between the axes of the rods is 45mm.

The cost is relatively cheap, and it is prepared for the mounting of a standardized self-leveling sensor, the links of the components are left below.

For more information, please not doubt in visit our website in www.3d-work.es
Greetings and I hope you like it.

VIDEO: https://www.youtube.com/watch?v=yDAevRpDmpo

BOM (BILL OF MATERIALS)

This is the complete list of hardware needed: