Storage tray for FibroTech acoustic panel shelf 110x355 mm.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The storage tray fits on the FibroTech, Shelf, 110x355 mm. The storage tray, Dimensions are 100x350x60 mm.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The storage tray fits FibroTech, shelf, 110x355 mm.
The storage tray, dimensions are 100x350x60 mm.
The design is prepared for splitting the parts into two parts, if needed.
i have added two locking pins to make it easier to align the two parts up, when assembling the two parts with super glue.
Print files:
File name: Storage tray.stl
File name: Locking pin1.stl
File name: Locking pin2.stl
Design file:
I have uploaded a STEP file, in case you want to edit the design.
File name: Storage tray.step
Prusa Slicer Instructions:
In case that you need to split the part into two parts
First place the part in upright position
In Prusa Slicer, select function “Place on face” And place the part in upright position (See example photo)
Split the part in two parts
In Prusa Slicer, select function “Cut” And cut the part into two parts (See example photo)
And print each part in horizontal orientation for best result. (See example photo)
Print settings:
Filament type: PLA or PETG
Layer height: 0.2 mm
Infill: 15% or more
Supports: None
Note: for the Locking pins use 100% infill
Post print instructions:
To get the best result, please sand or file the surfaces that are going to be assembled. Before gluing the parts together.
Happy printing :-)