Illuminated Galaxy Edge Control Panel #1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This illuminated control panel is designed to be easy to print and to wire without soldering.
- Ocena
- 0 / 5
- Polubienia
- 4
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
This is one of two illuminated control panels I made for my office. Like the previous one, the stl’s for this one are also split to be printed in multi-color without supports. The lenses are printed separately and are glued in, I printed them in semi-transparent PETG and turn ironing on. For the white lights, I used white filament and the clear led’s and the thicker lenes named “THK” so they weren’t so bright.
Soldering is not required as I utilized 8mm prewired 24v LEDs and a 2x12 screw terminal power distribution board. You only need to cut and strip the wires to length and terminate them into the board. Put the LED’s in the hole from the back side, aligning the flat on the LED. Then rotate the LED 180 degrees, to lock them in place. I also used a prewired jack to power the board. You will need 2mm x 6mm screws to secure the board. I purchased a 24V 3w Power Supply to power mine.
Printed on a Prusa XL(aff.) with Polymaker Metallic Pro PLA