1 / 3
Plunger Tuning for Nerf Alpha Strike Fang QS-4 — zdjęcie 1
1 / 3

Plunger Tuning for Nerf Alpha Strike Fang QS-4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Big Figerloop Priminghandle and better Pungerhead

Ocena
0 / 5
Polubienia
3
Pobrania
5
Wydruki
0
Wyświetlenia
87
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This plunger head and grip combination allows for better performance and priming action. It takes about 50 min. to print and less than 5 min. to assemble. All you need is one M3X16-20mm flathead screw, any O-ring that is 2.5 mm thick, and the printed parts. Needs some shell cutting on the back/spring cap. Boosts your FPS by about 10-20+.

                                                                         Flatish Screw you need:

Tagi