XYZ Calibration Cube - Test Your 3D Printer Accuracy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The image is for illustration only
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Open Community License v1.1
About This Model
This XYZ Calibration Cube is an essential tool for every 3D printing enthusiast. Designed to help you evaluate and fine-tune your printer's setup, this compact test model allows you to check for dimensional accuracy, layer consistency, and axis alignment across all three axes ($X$, $Y$, and $Z$).
Why Print It?
Quick Print: Takes very little time and filament to print.
Easy Dimensional Check: Measure the outer $20 dimensions with digital calipers to calculate your step adjustments.
Visual Inspection: Easily check for over/under-extrusion, ringing, ghosting, and top-layer fill quality.
Recommended Print Settings
Infill: 15% – 20% (Grid or Gyroid)
Layer Height: 0.2 mm
Perimeters/Walls: 2 or 3
Supports: None (designed to print completely support-free)
Print it, measure it, and get your printer dialed in perfectly!