Moddiy ATX2ATX mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mounting plate for the ATX 24 Pin Multiple Power Supply State Sync Start Adapter found on Moddiy.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I got a couple of these state sync boards from moddiy.com but couldn't find any mounting brackets or plates for it. So here is a rudimentary one that should fit. The boards usually arrive a bit bent inwards due to soldering pressure when they make them (they are hand soldered).
The pitch for the fasteners is 80mm, I chose two holes for this as I plan to make an adapter for these but I don't know just yet if I will mount them directly in the case or on some fans.
If you make mounting adapters for it, or if you decide to remix it, please let me know and I will update this.
I ran the stl through a online STL-fixer because I don't know what I am doing. I've attached the original file too.