Hermes Lite 2- Cooling Platform 60mm Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I upgraded the Original to a bigger 60x60x15 Fan, mounted on the bottom , and blows cooling air upward to the case.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE: Bigger Fan than the ORIGINAL, especially if you are Running Digital Modes or AM... 60mm fan is better than 40mm.
Hermes Lite 2 Cooling Stand For the Hermes Lite 2 SDR Transceiver. It keeps the bottom heatsink cool.
Iused 3DFuel PCTG filament. 265C nozzle (0.4 regular nozzle) and 80C Bed. You do not need an enclosed 3d printer bed but it helps. The only support is a 3mm-5mm brim. Use at least a 5mm brim for an open bed with no enclousure. It takes about 2 hours to print.
My Printer is a BambuLab P2S.
Download Printer profiles here for PCTG for your own Printers. https://support.3dfuel.com/hc/en-us/articles/22046343945495-Pro-PCTG-Print-Profiles
This is also on TinkerCad https://www.tinkercad.com/things/aDqRpCXvm58-hermes-lite-2-60x60x15mm-cooling-platform
Thingiverse ---> https://www.thingiverse.com/thing:7309823
If Printing in PLA probably use 210C Nozzle and 55-70C bed.
155mm x 126mm x 30mm tall platform so whatever rubber feet or other things you use on the bottom to stabilize the radio will likely work.
60x60x15mm Noctua NF-A6x15 PWM, Premium Quiet Slim Fan, 4-Pin DC 12V
https://a.co/d/02yAM6Ox USA Amazon Link
--------------------------------------------
Printed with a BambuLab P2S.
Filament: 3DFuel PCTG (Fantastic Stuff) Better than PETG. No stringing. 265c Nozzle/ 80C Bed Temp.
Made in America in Fargo, ND.
-----------------------------------------------
Mount Fan underneath the Housing with the fan sticker facing up, blowing upwards to the bottom of the Hermes Lite 2. The Fan Holes are 3mm. Bolt length is 3x25mm. Fan Thickness is 15mm.
The 4 holes in the back are for zip-ties to stabilize the power cord.
----------------------------------------------
The Fan Controller:
(https://a.co/d/08D39zXZ) $15
Delinx 36W 12V PC Fan Power Supply,4 Cooling Fan Speed Controller,100-240vAC to 3-12vDC Adjustable 3A Power Adapter,with Fan Splitter Cable,DC Female to 4 x 3/4 Pin, Multi-Functional
----------------------------------------------------------
This build is a bit bigger than the 40x40x10mm fan but the airflow is better but the platform is the same print size.