Vertical Graded Card Stand Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A way to display your graded cards that are in my Vertical Graded Card Stands.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 1505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This model uses a medium sized command strip to mount to the wall, the stand is made to fit the base of my Vertical Card Stands https://www.printables.com/model/152602-psa-cgc-bgs-gsg-sgc-and-onetouch-vertical-graded-c You could also use VHB or whatever other form of adhesive you want as well but this does have a recessed area for the command strip to fit into so its a proper distance from the wall.
In testing I've found that the mount is able to be slowly pulled back off the wall, the command strip will detach from the part and, if you pull slowly enough, you'll be able to remove the strip from the wall like usual.